• Derecelendirme: 0/5 - 0 oy
  • 1
  • 2
  • 3
  • 4
  • 5
wholesale Belt Conveyors
45°Large angle belt conveyor is widely uses in mine, metallurgy, building material, chemical industry, power, grain, and other industries to convey bulk material. Due to the friction between material and rubber belt, large inclination will cause material sliding from the belt, so the max. inclination for common belt conveyor can only reach 18~20°. But the inclination can reach 30~60°in special designed belt conveyor ( for example: deep though conveyor, walled conveyor), even vertical elevation can be realized ( for example: waved conveyor, press belt conveyor, pocket conveyor ).
The special design has deep though, walled, and vertical elevated type design of belt conveyor. (waved conveyor, press belt conveyor, pocket conveyor ).
Our company contributed in research of large inclination belt conveyor from 1970’s, and continuously supplied reliable running large inclination belt conveyor during last several decades.
* Large conveying angle (30~90 degrees);
* Small footprint and low investment;
* The conveying volume is large and the lifting height is higher;
* Smooth transition from horizontal to inclined (or vertical);
* It is suitable for conveying powdery, granular, small block, paste and liquid materials that are easy to be scattered;
* Low energy consumption, simple structure, high belt strength and long service life..
Product details:
Large Angle Belt Conveyor is composed of conveyor belt, roller, belt tensioning device, cleaning device and so on. When the materials fall down on the conveyor, the roller under the belt will drive the belt forward. In this way, the material will be sent to the feeding device.
The large-angle corrugated sidewall belt is composed of a base belt, a corrugated sidewall, and a horizontal partition. The sidewall prevent the material from slipping and falling. In order to facilitate the winding around the drum, the edge is designed to be corrugated; the function of the diaphragm is to support the material, and in order to achieve large inclination, the T-type or TC is used. The edge and the diaphragm are connected to the base tape by secondary vulcanization and have a high joint strength.
Driving pulley is the main part for transmitting the power.
The surface treatment of the driving pulley can be smooth steel, herringbone or rhombic rubber lagging.
The smooth steel pulley is available for the place which environment is small power, small belt width and dry.
The herringbone rubber lagging has a big friction factor, better anti-slippery and drainage ability, but it has its own direction.
Our company adopts special fine welding steel pipe for idler, and does puncture processing in the tube. The roundness is controlled in special tolerance scope. The axle is according to standard tolerance and manufactured by fine cold drag steel. The bearing housing has been manufactured after stamping many times by the imported cold griped steel.
Large angle belt conveyor applied in the aggregate conveying for the concrete batching plant.
Delivery,shipping and service
Timely delivery: Within 10 working days after the down payment
Shipment details:
Container20' Container40' Container
   wholesale Belt Conveyors

Hızlı Menü:

Konuyu Okuyanlar: 1 Ziyaretçi
mersin bayan escort